VOC-compliant specialty chemicals
Klein Tools recently introduced its new line of high-performance specialty chemicals including contact cleaners, firestop caulk, room temperature vulcanizing (RTV) silicone sealants, lubricants and wasp and hornet spray. Klein chemicals are volatile organic compound (VOC)-compliant and high dielectric. Colorful icons allow for quick identification and selection for specific applications.
www.kleintools.com

High-side truck boxes
Weather Guard high-side truck boxes provide secure, durable and more convenient tool storage above the truck bed. Available in aluminum and steel, the boxes’ new three-point latching system secures each side of the box against theft, vandalism and weather. A large, stainless-steel D-handle opens and locks easily. A picture frame body design has an extra large opening for maximum storage space and tool accessibility. Adjustable legs allow box mounting for maximum bed space.
www.weatherguard.com

Surface protectors
Pro Shield from Surface Shields can help keep jobsite floors and counters safe from damage and debris. This reusable surface protector is a lightweight yet slip-resistant and flexible material that can be laid over areas needing protection. Top side absorbs up to 10x its own weight and bottom side is water repellent.
Complete press release | www.surfaceshields.com

Pen-and-tape label dispenser
Dymo’s Rhino 101 provides a convenient, dependable pen-and-tape solution for fast, easy labeling all around the jobsite. The reusable label dispenser provides tape, pen, writing surface and cutter all in one. The drop-in tape cartridge contains easy-to-peel industrial-strength Rhino labels, and the tool includes black Sharpie retractable permanent marker. Available for wire/cable or general purpose labeling.
www.rhinopromo.com

GPS locator/anti-theft alarm
DeWalt adds the DS500 MobileLock GPS locator and anti-theft alarm, a stand-alone, portable, wireless locating and alarm system that mounts to equipment. GPS technology tracks location of equipment and can sound an alarm and contact the owner if the unit gets moved or if someone attempts to remove the alarm. Unit can also be set up to monitor for tampering, door opening, vibration or temperature change. Set-up can be done via phone or through the MobileLock Web site.
Complete press release | www.dewalt.com

Belt-driven personnel cooler
Airmaster’s new 42" belt-driven Mancooler MC42OS personnel cooler features a 1 hp, 115-volt two-speed motor that’s located out of the airstream which keeps away dirt and debris and ensures longer and better performance. Comes fully assembled and is easy to maneuver. Its guards are epoxy-coated and vibration-isolated for quiet operation. It moves 17,100 cfm on high speed.
www.airmasterfan.com

Duct tape
Shurtape Technologies, LLC introduces its T-Rex ferociously strong duct tape, an all-weather, super tough duct tape. T-Rex (also known as PC 745) uses the company’s state-of-the-art co-extrusion process which insures the polyethylene backing will never delaminate from the cloth scrim. Compared with ordinary duct tape, T-Rex has 4x the staying power due to its all-weather skin, 3x the holding power and 2x the “bite” to form a stronger bond.
www.shurtape.com

Power trowels
Husqvarna Construction Products introduces the TR trowels based on the past Superior brand with better control and balance while delivering the smoothest slab possible. Available in 36” and 48” models with upgraded features for a great price when compared with other trowels. Models include a lifting bracket, cast iron base, Viton gearbox seals, easily adjustable balance arm, heavy-duty guard ring with a low profile and blade arms with a universal bolt pattern.
Complete press release | www.husqvarna.com

Aluminum mini working platform
Louisville Ladder offers the L-2241-03 Type II 225 load capacity aluminum mini working platform. It is lightweight and easy to transport and perfect for painting and working around the house. It has a 12" wide slip-resistant standing surface. The unit is easy to store and the easy to use hinge makes setup and takedown easy. Features slip-resistant rubber shoes.
www.louisvilleladder.com

Hip/jack hanger
The new Simpson Strong-Tie THJU hip/jack hanger offers flexibility, ease of installation and performance. Its unique configuration allows it to handle right- and left-hand hips, and installs either before or after the hip and jack are in place. It’s offered to fit a range of hip skews up to 65 degrees, and various single- and two-ply hip/jack combinations.
www.strongtie.com

Stake extractors
JackJaw stake extractors from Construction Accessories Inc. make an easy task of pulling concrete form stakes, “T” fence posts and string line stakes. It works on straight or curved sections of metal or wood forms. The patent-pending jaw and lever mechanism pulls stakes straight up without bending them and eliminates side loading and the resulting strain on the operator’s back. Made from heavy gauge steel. Available in two sizes.
www.constructionaccessories.com

Diamond cut-off wheels
Pferd adds three types of cut-off wheels to its line. The PS-Forte/ Universal line is a cost-efficient choice for general-purpose cutting. The SG Elastic/ Performance line meets the needs of the trade professional and the SG-Plus/Special High Performance line provides the ultimate in quality and cutting performance. See section 206 of the Pferd Catalog to select the right blade for your job. All are available in 4 1/2" to 6" diameters and thicknesses .060" to .125" and in three bore sizes, 5/8", 7/8" and 1".
www.pferdusa.com

Seismic wedge anchor
New Trubolt+ is a true seismic wedge anchor from ITW Red Head that goes beyond the crack. This new innovation from ITW supports seismic tension values without compromising holding power. Trubolt+ is 2006 IBC compliant with a Category 1 performance rating and approved for use in all seismic zones, cracked and uncracked concrete applications.
www.itw-redhead.com

All-steel hammer
Dead On Tools, a division of Pull’R Holding Company, recently introduced its new all steel hammer. The unique hammer has a patent-pending head design that really pushes hammer technology edge through advanced computer aided design and state-of-the-art production techniques, report company sources.
Complete press release | www.pullr.com

Framing square
The Pivot Square framing square is the first product to become a C.H. Hanson Signature Series item. It features three UV-resistant vials that quickly and easily determine roof pitches and angles, indicate grade, facilitate miter cuts and allow for leveling and plumbing cuts. Its locking mechanism sets the square at a specific angle for accurately marking repetitive cut lines in degrees or roof pitches.
Complete press release | www.chhanson.com

Cordless power tubing cutter
Superior Tool Company offers the UltraCut cordless power tubing cutter that cuts copper tubing with minimal burr in three seconds. It is small enough to fit into tight quarters for hard-to-reach plumbing jobs. The handle design allows most users to reach into the rafters to make a cut without getting on a ladder. Its TruTrak head centers the cutter on the tubing so the tool does the work, not the user.
Complete press release | www.superiortoolco.com

30 ton puller
This time-saving 30 ton Hydra Grip-O-Matic puller removes larger gears, bearings and other press-fitted parts with speed and ease. From SPX Hydraulic Technologies, it can be used in a variety of industries including agriculture, trucking or any industry where heavy industrial equipment is utilized.
www.spx.com

Combination protractor
The ProSite CP505A-12 combination protractor from L.S. Starrett Co. provides fast, direct readings for miter cuts, single cuts, compound cuts, exact angle/supplemental angles and roof pitch references. For mitering or making single cuts for butt joints, the user simply adjusts the tool legs to the work surfaces, reads the angle on the dial face, sets the miter saw to the reading and makes an accurate, professional miter cut.
Complete press release | www.starrett.com

Angle polisher
The Fein angle polisher features a variable-speed, electronically controlled, constant-torque motor for uniform finishing. Easily switches from linear to rotary operation. Use for leveling weld seams, removing spatters, deburring, smoothing, removing scratches, matting, satin finishing, brush polishing, generating surface effects and creating decorative surfaces.
www.feinus.com

18-volt Li-ion angle impact driver kit
Makita’s new BTL061 LXT 18-volt angle impact driver delivers power for a variety of fastening and loosening tasks. The Makita-built motor and impact mechanism produces 531 in.-lbs. of maximum torque and 0 to 3,000 ipm. The variable-speed 0 to 2,000 rpm unit delivers better control in a range of applications for fastening and loosening in tight, confined spaces. Includes an LED light.
www.makita.com

Upright power distribution station
Construction Electrical Products’ new upright portable power distribution stations may be custom-configured to utilize 15 to 45 KVA transformers. The heavy-gauge, square-tube steel cart and stainless steel 3R electrical panel allow this unit to stand up to abuse of harsh jobsite conditions. The clear see-through breaker panel allows for easy identification of tripped circuits.
www.cepnow.com

5.5 TPI wood-cutting recip saw blade
The M. K. Morse Co. offers a new line of Master Cobalt reciprocating saw blades for cutting wood and nail-embedded wood. Tooth geometry and set pattern increases productivity and decreases cost per cut. The larger tooth and increased weld contact area on the blade is more durable than traditional 6 TPI blades. The 5.5 pitch, .050" thick Master Cobalt blades are available in 6", 9" and 12" lengths.
Complete press release | www.mkmorse.com