Cordless brad nailer
DeWalt launches its 18-gauge cordless brad nailer that uses its 18-volt cordless battery and a mechanical flywheel system. Unit can drive an 18-gauge nail up to 2" into hardwoods. Offers a sequential or bump firing mode, 12-position depth adjustment system and a tool-free jam clearing system.
Complete press release | www.dewalt.com

Compact drills
DeWalt now offers 12-, 14.4- and 18-volt compact drills and a new 18-volt hammer drill. The new drills are less than 9" long for access in tight spaces. The 18- and 14.4-volt models have 1/2" chucks and the 12-volt tool has a 3/8" chuck. All units have all-metal, single-sleeve ratcheting chucks and an LED work light. The frameless motor design improves airflow and all-metal planetary gears add to the tools’ durability.
Complete press release | www.dewalt.com

3/8" corded drills
DeWalt offers three new 3/8" corded drills: The DWD115K 8 amp drill with a new mid-handle grip, the DWD110K 7 amp drill with pistol grip and the DWD112 7 amp drill with a pistol grip. All models have the anti-slip comfort grip; the DWD115K and DWD112 have all-metal keyless ratcheting chucks. The two grip styles allow the user to select the best comfort on the jobs they do most.
Complete press release | www.dewalt.com

Demolition hammers
DeWalt offers its new D25899K, D25901K and D25941K demolition hammers with increased durability, comfort and serviceability. Spring-loaded dust seals and non-air pumping beating pieces keep contaminants out of the tools. Electronic soft-start eases tool starting and maintains performance under load. The D25901K features a 19-setting variable impact control. In-line tools feature DeWalt’s Shocks vibration control that decreases user fatigue and improves productivity.
Complete press release | www.dewalt.com

SDS Plus masonry drill bits
DeWalt adds two new lines of SDS Plus drill bits to its accessory line. The four-flute, two-cutter and four-flute, four-cutter Rock Carbide SDS Plus bits last longer and drill faster. The two-cutter bits come in 5/32" to 1 1/8" sizes and the four-cutter bits come in 5/8" to 1 1/8" sizes. Based on DeWalt tests, the four-cutter design cuts 25 percent faster than the leading competitor.
www.dewalt.com

LED work light
DeWalt introduces the Crosscut Positioning system (XPS) work light that mounts to the head of DW713, DW715, DW716 or DW718 miter saws. It is tightly secured to the saw so vibration is not a problem. It also creates a blade shadow that indicates the cut line on the material. The encapsulated LED lamp assures the unit remains moisture-resistant and weather-tolerant.
www.dewalt.com

10" compound miter saw
DeWalt’s DW713 compound miter saw offers increased accuracy, capacity, durability, portability and ease of use. Its patented precise miter system and machined base fence remains perpendicular to the blade for accurate cuts. Cuts up to 3 1/2" base moulding and 4 1/2" crown moulding against the fence and can cut 2x6 material at 90 degrees and 2x4 material at 45 degrees.
Complete press release | www.dewalt.com

Cordless impact drivers and wrenches
DeWalt introduces a new line of eight impact drivers and wrenches in 18, 14.4, 12 and 9.6 voltages. They use DeWalt’s high-speed frameless motor with replaceable brushes for durability and are shorter in length than previous models. The improved variable-speed reversing switch offers more user control. The textured anti-slip comfort grip handle offers more comfort with extended use.
Complete press release | www.dewalt.com

Framing nailers
DeWalt introduces the D51850 round head framing nailer and the D51825 clipped head framing nailer. Units feature a magnesium body and side guards for long life. Units can fire on average eight nails/second and consume 20 percent less air than competitive models, report DeWalt sources. Powerful enough to drive 3" nails into engineered lumber.
Complete press release | www.dewalt.com

18-volt Li-ion cordless tools
DeWalt now offers an 18-volt system that uses its Nano phosphate Li-ion batteries that is also compatible with its present 18-volt cordless tool line. The batteries offer longer cycle life, less weight, greater performance and an expanded system of tool offerings. Presently, DeWalt offers 38 18-volt tools that can be used with the new battery system. The charger can also charge DeWalt 7.2-volt to 18-volt Ni-Cd, Ni-MH and Li-ion batteries.
Complete press release | www.dewalt.com

28-volt Li-ion cordless tools
DeWalt’s 28-volt Li-ion powered tools offer a 2,000 recharge average cycle life, lighter weight and greater performance. Features the DC910 hammer-drill, DC315 recip saw, DC310 6 1/2" circular saw, DC810 impact wrench, DC228 rotary hammer, DC413 cut-off tool, DC318 jig saw and DC515 flashlight.
Complete press release | www.dewalt.com

28.8-volt Li-ion rotary hammer kit
Panasonic’s EY7880LN2S rotary hammer is compact, lightweight (8.4 lbs.) and loaded with great features. It is powered by a 3.0 amp-hour Li-ion battery pack that fully charges in just 70 minutes. The tool has a magnesium gear case, excellent cooling system and a dust-proof switch that delivers a design that supports continuous heavy-duty use. Two speeds – one for brick and block and one for concrete – deliver a hammering force of 23.6kN.
www.panasonic.com

14.4-volt Li-ion drill/driver kit
The Panasonic EY7440LN2L drill/driver kit weighs 3.5 lbs. and has an ergonomic grip that reduces fatigue. Its 3.0 amp-hour Li-ion battery pack delivers long run times and charges in 50 minutes. It has high power (390 in.-lbs.), two speeds and 18-stage clutch for precise power. Features a 1/2" keyless chuck, electric brake, LED work light and belt hook. Flashlight also included in kit.
www.panasonic.com

14.4-volt Li-ion impact driver kit
The EY7540LN2L from Panasonic is a 1/4" hex quick-connect chuck impact driver with three speeds and three torque levels. It uses a 3.0 amp-hour Li-ion battery pack and delivers a maximum of 2,300 rpm and 1,330 in.-lbs. of torque in a package that weighs just 3.1 lbs. A brushless motor and electronic switch deliver twice the life. The electric brake, LED work light, and belt hook add to user convenience. Flashlight included in kit.
www.panasonic.com

3.6-volt Li-ion screwdriver kit
The Panasonic EY7410LA2S bendable screwdriver is compact and lightweight (1.1 lbs.) yet delivers 39 in.-lbs. of torque. It has two speeds and a 21-stage clutch with auto shut-off for precise torque application without over-tightening. The tool uses a 1.5 amp-hour Li-ion battery pack that charges in 30 minutes. A 1/4" hex quick-connect chuck and LED work light make it convenient to use.
www.panasonic.com

14.4-volt Li-ion impact wrench kit
The Panasonic EY7541LN2L is a 1/2" square-drive impact wrench with three speeds and three torque levels. The tool uses a 3.0 amp-hour Li-ion battery pack and delivers 1,640 in.-lbs. of torque and 2,300 rpm. Weighing just 3.3 lbs., the tool uses a brushless motor and electronic switch to provide twice the life cycle for durability. Equipped with electric brake, LED work light and belt hook for easy use. Flashlight included in kit.
www.panasonic.com

14.4-volt Li-ion multi-tool kit
The Panasonic EY7542LN2L is a 1/4" hex chuck combination drill/driver and impact driver. It uses a 3.0 amp-hour Li-ion battery pack and provides 124 in.-lbs. of torque in the drill/driver mode and 1,239 in.-lbs. in the impact mode. Switch between modes with the flick of a switch. Fully loaded with variable-speed, 18-stage clutch, electric brake, LED work light and belt hook.
www.panasonic.com

18-volt Ni-MH drill/driver kit
The Panasonic EY6450GQKW drill/driver has 442 in.-lbs. of torque in an ergonomically balanced chassis. Its new motor and all-metal gear system drills holes up to 2" in diameter. Features a two-speed variable speed with electric brake and a 15-stage high-torque clutch, a 3.5 amp-hour battery,
1/2" heavy-duty keyless chuck and sure-grip rotating support handle.
www.panasonic.com

15.6-volt Ni-MH drill/driver kit
The Panasonic EY6432GQKW Ni-MH drill/driver kit delivers high power (390 in.-lbs.) in a compact and lightweight package (4.8 lbs.) with great ergonomics. Features a 3.5 amp-hour battery, keyless chuck, variable speed and 18-stage clutch.
www.panasonic.com

12-volt Ni-MH impact driver
The Panasonic EY7202GQW is the first impact driver with three speeds and three torque settings. It is also the first impact driver with an electronic clutch, digital readout and auto shut-off for no more guess work or ruined materials and fasteners. Offers 2,300 rpm and 1,060 in.-lbs. of torque and a long-running 3.5 amp-hour battery.
www.panasonic.com

18-volt Ni-MH metal cutter
The Panasonic EY3552GQW metal cutter has a 6 1/2" 40-tooth carbide-tipped blade for smooth cutting of pipe, strut, threaded rod and metal studs. The left-sided blade offers easy visibility and an in-line design for comfortable cutting. The 3.5 amp-hour battery cuts 140 pieces of 1" conduit pipe on one charge. Has an electric brake, a safety switch lock and a spindle lock button.
www.panasonic.com

18-volt Ni-MH recip saw
The EY3544GQK Ni-MH recip saw from Panasonic has an improved motor and gears for long-lasting performance and powerful cutting. Features 0 to 2,700 spm and a 7/8" stroke, keyless blade clamp system and an adjustable pivoting shoe. Electric brake and two-finger trigger switch deliver control and safety.
www.panasonic.com

18-volt Li-ion compact 1/2" drill/driver
Makita’s BDF452HW 1/2" drill/driver is unique in design and performance, report Makita sources. The 18-volt compact Li-ion battery reaches full charge in 15 minutes, four times faster than the competition. The Makita-built motor delivers 450 in.-lbs. of torque in a compact design weighing only 3.5 lbs., which Makita sources report is the best power-to-weight ratio of any compact drill/driver on the market.
www.makita.com

18-volt Li-ion compact impact driver
The BTD142HW from Makita is powered by a 1.5 amp-hour 18-volt Li-ion battery that weighs 40 percent less and reaches full charge in just 15 minutes, four times faster than the competition, say Makita sources. Makita-built four-pole maximum torque motor delivers 1,280 in.-lbs. of torque and 2,300 rpm in a compact design that weighs only 2.8 lbs.
www.makita.com

18-volt Li-ion 1/2" impact wrench
The BTW450 1/2" impact wrench is a powerful and convenient substitute for air-powered and AC wrenches. The Makita-built two-pole motor delivers a top no-load speed of 1,600 rpm and 325 ft.-lbs. of torque created by 2,200 ipm. It has a 1/2" square drive, round head detent pin standard (flat pin optional) for steel beam construction, telephone pole installation, automotive, mudsills and more.
www.makita.com

SDS Plus 1-1/4" rotary hammer
Makita’s model HR3210C SDS Plus 1 1/4" rotary hammer is versatile and high-powered for heavy-duty applications. It has Anti-Vibration Technology (AVT), Makita’s counter-balance system that reduces vibration. Features three-mode operation (hammering with rotation, rotation only and hammering only), variable speed control, and built-in torque limiter. Delivers 315 to 630 rpm and 1,650 to 3,300 bpm.
www.makita.com

18-volt Li-ion angle impact driver kit
Makita’s new BTL061 LXT 18-volt angle impact driver delivers power for a variety of fastening and loosening tasks. The Makita-built motor and impact mechanism produces 531 in.-lbs. of maximum torque and 0 to 3,000 ipm. The variable-speed 0 to 2,000 rpm unit delivers better control in a range of applications for fastening and loosening in tight, confined spaces. Includes an LED light.
www.makita.com

18-volt Li-ion cordless impact driver
The Makita BTD141 18-volt Li-ion cordless impact driver has a Makita-built four-pole maximum torque motor that delivers 1,330 in.-lbs. of torque, 2,300 rpm and 3,200 ipm. It is just 5 3/4" long and weighs only 3.3 lbs. The LXT Lithium-Ion battery and charging system produces 430 percent total lifetime work with 2.5 times more cycles.
www.makita.com

SDS Max 1 3/4" rotary hammer
The Makita HR4510C SDS Max 1 3/4" rotary hammer is equipped with Anti-Vibration Technology (AVT). It has hammering with rotation/hammering only modes, variable speed control, built-in torque limiter, LED light and soft-start electronic control. Delivers 130 to 280 rpm and 1,250 to 2,750 bpm.
www.makita.com

Reciprocating saw
Makita’s JR3070CT reciprocating saw features more power and less vibration with Makita’s anti-vibration technology (AVT), which reduces vibration up to twice that of competitors’ saws, Makita sources report. Equipped with a clutch that protects the gears if the blade binds.
www.makita.com

Circular saw line
Makita’s 5007MG 7 1/4" circular saw, 5377MG 7 1/4" hypoid saw and 5007MGA 71/4" circular saw with electric brake feature highly durable magnesium components and a 15 amp Makita-built motor. Magnesium creates a rigid platform while shaving almost 1 lb. from the 5007MG’s final weight and 2 lbs. from the 5377MG’s weight.
www.makita.com

18-volt Li-Ion 1/2" impact driver
Makita’s BTW251 1/2" impact driver is powered by a Makita-built four-pole motor, which generates energy on the magnetic field every 90 degrees (not 180 degrees) and is engineered with dual steel ball bearings for more efficient power in a compact size. Delivers 3,200 ipm.
www.makita.com

5" angle grinder
The 9565PC angle grinder features Makita’s Super Joint System (SJS), which disengages the motor if the wheel binds. Gear housing can be positioned every 90 degrees, and labyrinth construction seals motor and bearings from contamination. Available in 4 1/2" (9564PC) and 6" (9566PC) models.
www.makita.com

10.8-volt Li-ion drill driver
The Flex Ali 10.8 drill driver features high-performance 10.8-volt Li-ion batteries with more power, longer life and no memory effect. The drill driver produces 0 to 500 rpm and features a built-in LED light for precise work in dark areas. Comes with battery, charger, LED lamp, bit set and case. Flex Li-ion technology is also available in a compact impact drill, the Ali 10.8S.
www.flexnorthamerica.com

Wall chaser
The MS1706FR wall chaser that makes laying cable or conduit child’s play, report Flex sources. It cuts two parallel slits up to 33mm deep and 30mm wide and a unique rotating motor system allows it to be used for pull cutting for vertical slots and push cutting for horizontal slots. Powered by a 1,400 watt, 7,500 rpm motor. Comes with cutting disc, side handle and carrying case.
www.flexnorthamerica.com

5" wet polisher
The Flex LW1503 wet polisher is a compact and powerful tool generating 3,700 rpm from a 7.4 amp motor. It’s lightweight, completely portable, and is the perfect tool for polishing surfaces and edges of sink holes, counter top edges and other small stone surfaces.
www.flexnorthamerica.com

Boa pipe sander kit
The Flex LRP1503VRA boa pipe sander kit is for sanding and polishing pipe. The sanding arm wraps itself around the pipe like a snake when pressure is applied, taking radii up to 270 degrees. Spring resistance between the deflection rollers provides uniform tension. Side handle rotates 180 degrees for narrow places. Comes with sanding belt assortment and carrying case.
www.flexnorthamerica.com

Oscillating tool
The new Multi-Master was developed from the experience that Fein has acquired in more than 40 years in oscillation technology. Oscillating movement and user-friendly accessories make the tool a versatile, high-precision tool for outfitting, renovation and repair work, report Fein sources.
www.feinus.com

Belt sanders
Fein Power Tools Inc. has launched a new range of belt-sanding machines: the Grit GI and GX models which are constructed on a modular principle, allowing add-ons to be fitted in a matter of minutes. System delivers flexibility, mobility and performance, Fein sources say.
www.feinus.com

Magnetic core drill
The Fein KBM-32Q magnetic core drill is up to 40 percent lighter in weight than most core drills. It has advanced motor technology to maximize the power and torque. A double dovetail rack provides extra stability, durability and precision.
www.feinus.com

Vacuum
The Fein Turbo II vacuum is designed for heavy, continuous use. It can handle power tools with inputs of 40 to 2000 watts (.3 to 19 amps). The two-stage motor has bypass cooling so if the hose or filter gets blocked, air will still cool the motor. Produces only 57.8 dB(A) at 3.5', making it one of the quietest vacuums available today, report Fein sources.
www.feinus.com

Sanders
Fein sanders are powerful and durable with a metal gear head and fiberglass-reinforced polyamide motor housing. Paired with a Fein dust extractor, it can help protect the environment, keep the workplace clean and meet EPA standards, Fein sources say.
www.feinus.com

Angle polisher
The Fein angle polisher features a variable-speed, electronically controlled, constant-torque motor for uniform finishing. Easily switches from linear to rotary operation. Use for leveling weld seams, removing spatters, deburring, smoothing, removing scratches, matting, satin finishing, brush polishing, generating surface effects and creating decorative surfaces.
www.feinus.com

Metal-cutting circular saws
The M. K. Morse Co. introduces new 9" and 7" Metal Devil metal-cutting circular saws with dry cutting technology. The low-speed, high-torque motors are optimized for metal cutting. The 9" model has a 15 amp motor that delivers 2,500 rpm and can cut up to 3" square tubing. Features a laser guide and 0 to 45 degree bevel cutting. The 7" saw has a 9 amp motor that delivers 3,500 rpm for cutting 1/4" mild steel. Tools have a durable carry case, retractable blade guard and a quick release chip collection cover.
Complete press release | www.mkmorse.com

14" dry-cutting metal saw
The M. K. Morse Co. now offers a 14" metal cutting saw with dry cutting technology. The saw provides longer life, little to no sparks, superior cut finish and faster cuts at a lower cost-per-cut vs. abrasive cutting. The low-speed, high-torque motor is optimized for metal cutting at 15 amps and 1,300 rpm for quick, clean cuts. The six pre-set markings in the base and vise make setting cuts quick and easy. Cut 5 1/8" diameter pipe and 3 3/4" rectangular steel.
Complete press release | www.mkmorse.com

Steel stud-cutting circular saw blade
The M. K. Morse Co. introduces the Metal Devil Stud Cutter, a 14" carbide-tipped circular saw blade for cutting steel studs. It makes clean, virtually burr-free cuts fast. The patent-pending tooth design reduces vibration and chipped teeth for longer blade life and less operator fatigue. Its unique gullet efficiently evacuates metal chips for faster cutting. Can cut 18- and 24-gauge steel studs and thin-steel materials such as thin wall tubing with 1/8" and thinner wall thicknesses.
Complete press release | www.mkmorse.com

Self-feeding wood bits
The M. K. Morse Co. self-feeding wood bits have a precision hardened cutting edge on a single-chip lift design for fast cutting and consistently accurate hole sizes. A self-feeding pilot screw pulls the bit into and through each cut. For fast bit changes and a secure chuck grip, the single-piece bit features a quick-change 7/16" hex shank with milled flats. Available from 1" to 4 5/8" diameters and includes two contractor kits and a 5 1/2" extension. Cutting edge is resharpenable.
Complete press release | www.mkmorse.com

Circular saw blade cuts stainless steel
The M. K. Morse Co. offers a new Metal Devil 14" circular saw blade that cuts stainless steel. It combines optimized tooth geometry, vibration dampening and specialized micro-carbides for superior cutting performance and reduced tooth chipping while greatly reducing blade vibration. Results are smooth, fast cuts, long blade life and reduced secondary work. The 90-tooth blade is ideal for cutting thin wall tubing, small bar stock and strip material.
Complete press release | www.mkmorse.com

Product catalog
The Wheeler-Rex 2008 product catalog features its pipe cutters, pipe threaders, universal dies/die heads, portable roll groovers, tube tools, plastic pipe tools, shut-off tools, pipe freezing kits, pipe drilling and tapping equipment, valve exercisers, hydrostatic test pumps, trash pumps, aluminum and iron pipe wrenches, crimping tools, pipe handling tools and other unique products.
www.wheelerrex.com

5.5 TPI wood-cutting recip saw blade
The M. K. Morse Co. offers a new line of Master Cobalt reciprocating saw blades for cutting wood and nail-embedded wood. Tooth geometry and set pattern increases productivity and decreases cost per cut. The larger tooth and increased weld contact area on the blade is more durable than traditional 6 TPI blades. The 5.5 pitch, .050" thick Master Cobalt blades are available in 6", 9" and 12" lengths.
Complete press release | www.mkmorse.com

Portable roll groovers
Convert your pipe-threading machine into a roll groover with this roll groover that fits Wheeler-Rex 6090, 7090, 6790 and Ridge 300 Series machines. Handles 1" to 6" Schedule 10 and 40 steel. Screw-feed design minimizes operator fatigue; shorter lengths of pipe stay safely on the rollers without assistance.
Complete press release | www.wheelerrex.com

Paper tape framing/metal connector nailer
The Bostitch F33PT 33 degree paper tape framing nailer converts into a metal connector nailer in just seconds. It drives 2" and 3 1/2" framing nails (.113 TO .162 diameter). The tool includes an interchangeable tip for driving metal connector nails (1 1/2" to 2 1/2" long) precisely into hardware such as hurricane ties and joist hangers.
www.bostitch.com

Plastic collated framing/metal connector nailer
The Bostitch F21PL 21 degree plastic-collated framing nailer converts into a metal connector nailer in just seconds. It drives 2" and 3 1/2" framing nails (.113 TO .162 diameter). The F21PL includes an interchangeable tip for driving metal connector nails (1 1/2" to 2 1/2" long) precisely into hardware such as hurricane ties and joist hangers.
www.bostitch.com

Wire-weld collated framing nailer
The Bostitch F28WW 28 degree wire-weld collated framing nailer drives 2" and 3 1/2" nails (.113" to .131" diameter). This award-winning design is packed with key features including a 16" layout indicator, an ultra-light magnesium design weighing only 7.7 lbs., a push-button depth of drive, and 1,050 in.-lbs. of power for engineered lumber applications.
www.bostitch.com

Disaster-resistant nail
The Bostitch HurriQuake Nail is a disaster-resistant fastener offering up to double the resistance to hurricane wind conditions and gusts up to 170 mph while providing 50 percent more resistance in earthquake conditions. Featuring an exclusive code report, the HurriQuake nail is marked with an easy-to-identify head to help inspectors recognize the nail.
www.bostitch.com

Metal connector nailer
The Bostitch MCN150 metal connector nailer places the tip of the nail directly into metal connector holes for a faster, more precise result. It drives 1 1/2" paper tape collated nails (.131" to .148" diameter). Able to fit between 12" O.C. spaces (only 10.5" long), the MCN150 features a lightweight design (only 4.8 lbs.) and an adjustable exhaust.
www.bostitch.com

Coil framing nailer
The Bostitch N89C-1 coil framing nailer drives 2" to 3 1/2" nails (.099" to .148" diameter). Delivering 20 percent more power than previous models, it features a magazine capacity of up to 300 nails. Other features include a lightweight magnesium design (only 8.1 lbs.), a push-button depth of drive, and a 360-degree adjustable exhaust.
www.bostitch.com

Sheathing nailer
The Bostitch N75C-1 sheathing nailer drives 1 1/2" to 3" wire-weld coil nails (.092" to .131" diameter). It touts 630 in.-lbs. of force, which provides more power than any other competitor in its class, Bostitch sources report. Other features include a tool-free dial-a-depth, a lightweight design (5.2 lbs.) and a slim design for maximum line of sight.
www.bostitch.com

Cap nailer
The Bostitch N66BC-1 cap nailer secures a 1" diameter plastic cap over materials such as house wrap, foam board and felt paper. It drives 1 1/4" and 2 1/2" nails (.080" to .092" diameter) into the cap to hold it in place. Featuring a magazine capacity of 300 nails and 100 caps, this method is 10 times faster than doing it by hand.
www.bostitch.com

Coil roofing nailer
The Bostitch coil roofing nailer – model RN46 – touts a magnesium design weighing only 4.8 lbs. Delivering more than 410 in.-lbs. of torque, the RN46 features a single-action side-load canister that loads in less than 10 seconds. The RN46 also provides a dry-fire lockout, carbide inserts, skid-resistant pads and an adjustable-depth dial.
www.bostitch.com

Pneumatic hose
The Bostitch ProzeHoze delivers unmatched maneuverability without the all too-frequent interruption of stuck or tangled hoses. Its patent pending raised rib geometry works in tandem with the hose’s lubricity to slide around baseboards, up staircases and over cabinetry. Moreover, it features a 50 percent lighter design to make light work of overhead applications.
www.bostitch.com

Rotary hammer
Hitachi offers its DH45MR 1 3/4" SDS Max rotary hammer with patented internal double-insulated (IDI) technology for outstanding durability. Hitachi claims it offers the fastest drilling and chiseling speeds available.
www.hitachipowertools.com

Strut cutter
The Unistrut Cut-N-Strut portable hydraulic tool cuts P1000, P1100, P2000, P4000 and P4100 Unistrut channel. The lightweight anodized aluminum frame weighs less than 50 lbs. Its compact design makes it easy to transport to any jobsite. Its universal hydraulic coupling can connect to your hydraulic power source.
www.unistrut.com

Flap disc
The Ovation flap disc from United Abrasives is a high-density flap disc that outlasts conventional flap discs by 40 percent and will not contaminate stainless steel. It has more grinding material and a double-thick design for softer, cushioned grinding, blending and finishing. May be used on carbon steel and stainless steel for long life. Available in 4 1/2", 5" and available soon in 7" with and without 5/8-11 hub.
Item 145 | www.unitedabrasives.com

Tile drill bits
Driltec offers the TSM-Titanium carbide-
tipped HT tile drill bits with 110 degree carbide tip-angle geometry. The bits have high-temperature brazing and are surface-hardened. Can drill very hard and abrasive materials up to a scratch hardness of 9. Ideal for rotary drilling of very hard tile, ceramics, porcelain and marble.
Complete press release | www.driltec.com

Cut-off wheel
The Z-Tech .045" (Type 27) cut-off wheel from United Abrasives is a patented high-performance cut-off made with special zirconium grain with a hard bond for long life. Performs fast, burr-free cutting on carbon steel and stainless steel. The Z-Tech .045" turns your angle grinder into a cutting tool.
Item 146 | www.unitedabrasives.com

Rebar cutter
Driltec offers the RebarCutter bit that has a special carbide tip for SDS Plus rotary hammer use. Its unique design allows for hammer-drilling through concrete-embedded rebar. The RebarCutter bits are up to four times faster than traditional rotation-only rebar cutters. Available in two working lengths of 7 1/2" and 16" with a drill diameter range from 1/2" to 1 1/4".
Complete press release | www.driltec.com

Multi-purpose drill bits
Driltec offers the SC multi-purpose drill bits with titanium carbide tips, a special carbide tip geometry and a diamond-ground cutting surface. They are designed to drill almost any material including stone, brick, concrete, wood, tile, glass, plastic and steel. Can be used in rotary only or rotary/percussion modes.
Complete press release | www.driltec.com

Spline or SDS Max bits
Driltex offers the patented Jet-Head multi-cutter bits with a center point for easy start-up and large relief channels for fast and efficient dust removal. Available in spline and SDS Max shank configurations, and Driltec sources report they make considerably more holes. Sizes are available from 5/8" to 2" in diameter with drilling depths of up to 36". They offer significantly reduced vibration and noise reduction. They combine performance and ergonomics, Driltec sources say.
Complete press release | www.driltec.com

Wood-cutting blades
Freud’s Diablo thin-kerf wood-cutting blades cover a vast range of needs and applications for all types of saws. They are designed and manufactured to the highest standards to ensure fast, precise and high quality cuts with cutting life and durability that far exceeds standard blades, say Freud sources.
www.freudtools.com

Ferrous metal-cutting blades
The Diablo Steel Demon saw blade is specially designed for the extreme demands of ferrous metal cutting, enabling super-fast precise cuts without the sparks, heat or burred edges that abrasive discs create. With up to 40x the life of standard abrasive discs, the Steel Demon blade delivers unparalleled performance and superior quality cuts. Available in a wide range of metric and standard sizes.
www.freudtools.com

Non-ferrous cutting blades
Freud developed these blades for cutting non-ferrous materials such as aluminum, copper and plastics but also ideal for laminate flooring, melamine, veneered plywood and for fine finishes in hardwoods and softwoods. Available in 7 1/4" circular saw, 10" miter saw and table saw and 12" miter saw sizes.
www.freudtools.com

Beam saw blades
Diablo Beam Saw Blades are designed for large-capacity beam, post and timber cutting. The 16 5/16" blades, available in 32 teeth and 60 teeth, are ideal for timber framing such as laminated veneer lumber (LVL) and glued timber (glulams). Also available in a 10 1/4" Diablo blade for Bigfoot brand saws.
www.freudtools.com

Polycrystalline diamond (PCD) blades
The only PCD-tipped blade recommended by James Hardie Building Products, Freud’s HardieBlade PCD-tipped blade combats the highly abrasive properties of fiber cement products such as siding, fascia, trim and backer boards. Available in 7 1/4" circular saw, 10" and 12” miter saw sizes.
www.freudtools.com

Hex bit sockets
Wright Tool offers 3/8" and 1/2" drive impact hex bit sockets that also are available in metric sizes. Offered in standard length, Wright Tool 3/8" and 1/2" drive impact hex bit sockets have replaceable hex bits in a variety of sizes and are held with a set screw. Sets of these impact-rated hex bits are available in standard and metric sizes.
www.wrighttool.com

Impact sockets
Wright Tool Company offers a complete line of 6-point and 12-point impact sockets featuring a patented Wright Drive design that delivers more torque with less fastener damage. The six-point impact sockets are available in drive sizes from 3/8" to 2 1/2" in a range of sizes. The 12-point sockets, designed for high-strength bolting, come in drive sizes 1/2" to 1 1/2" in a range of sizes. The sockets feature large, stamped sizes for easy readability. Metric sizes carry a stamped double ring.
www.wrighttool.com

Bolt extractor
Alden Corporation introduces the ProGrabit tool for removing screws or bolts with any type of damaged screw head, from any material. A drill and extractor in one tool, it takes the guesswork out of matching drill size with extractor. Its quick-connect chuck increases ease of use: simply drill, then flip and extract. Made from tempered M2 high speed tool steel and can drill bolts of grade 8 or 10.9 class without excessive wear. Features a self-centering tip.
Item 147 | Complete press release | www.aldn.com

14.4-volt cordless applicators
Cox North America introduces a 14.4-volt line of battery-powered caulk guns. Built to provide fast, efficient and easy application of even the most viscous adhesives. Line includes models for 10 oz. and 29 oz. cartridges and 10 or 20 oz. sausage/bulk. Guns are anti-drip and have variable-speed control and an ergonomically designed handle. Each applicator comes with a charger and a 14.4-volt Ni-Cd rechargeable battery.
Item 148 | www.cox-applicators.com

Fiber cement circular blade
Bosch Power Tools and Accessories now offers its CB706FC carbide-tipped circular saw blade for cutting fiber cement. The 7 1/4" hard-body blade has a thin kerf design that removes less material in larger chunks that results in a cleaner, faster cut. Also cuts backer board and Masonite material. It has a 5/8" arbor for standard circular saws and a diamond knockout for worm-drive saws.
Complete press release | www.boschtools.com

Drywall router
The new RotoZip DR1 drywall router weighs 2.8 lbs. and is 7.5" long. It is 20 percent shorter than other models and has a smaller grip diameter for enhanced capability and control. At 33,000 rpm, it delivers up to 45 percent higher speed under load than other models. Has on-tool wrench storage, replaceable motor brushes, vents that keep dust away from eyes and an easy-view depth guide.
www.rotozip.com

Carbide hole saw
Bosch Power Tools and Accessories has a new carbide hole saw designed to easily cut through wood, ceramic tile (floor and wall), brick and cinder block, cement board, fiber cement board and plastic. The diamond-ground carbide teeth are durable and powerful for fast material removal. The drop-shaped chip clearance slots offer greater chip and dust removal. The carbide line has 19 saws ranging from 1" to 4 1/8".
Complete press release | www.boschtools.com

Wood-boring bits
Irwin introduces the new Speedbor Max wood-boring bits that have a unique tri-flute design with cutting spurs for maximum speed, ease and durability. The full screw tip allows the bit to self-feed, providing cleaner holes with less effort.
www.irwin.com

Framing saw blade
Irwin Industrial Tools offers the new Marathon WeldTec circular saw blade with carbide teeth that are welded, not brazed, to the blade. Its UC2 carbide and every-other-tooth (E.O.T.) grind technology offers enhanced cut quality and makes it the fastest framing blade ever, claim Irwin sources. The welded carbide teeth have a 30 percent stronger tooth bond for longer blade life. The carbide teeth are 70 percent tougher than standard carbide and stay sharp longer. A reinforced shoulder improves durability.
www.irwin.com

Full round head gas framer
The new Senco full round head GT90FRH cordless gas framer combines the convenience of a cordless tool with the power and utility of a pneumatic framing nailer. These well-balanced nailers have the power for all framing and sheathing job requirements. Well built, they ensure all-day durability and reliability. Each comes with a Ni-MH battery, battery charger, service tools, durable plastic case and a two-year limited warranty.
www.senco.com

1/4" hex impact driver
Expanding its line of professional V18 power tools, Milwaukee Electric’s V18 1⁄4" hex impact driver delivers 2,600 rpm and a category leading 1,400 in.-lbs. of torque. It has an all-metal gear and impact mechanism, a variable-speed trigger and a five-year or 2,000-charge warranty on the battery. Added conveniences include a built-in LED light for lighting dark work areas and a fuel gauge on the battery pack.
www.milwaukeetool.com

Tap line
Triumph Twist Drill offers its new Work-Rite taps that include hand taps, spiral point taps, pipe taps and tap sets. Additional products include a combination drill and tap, drilling/tapping fluid and tap wrenches. The taps are designed for use in a wide range of materials including steel, cast iron and aluminum alloys. The black/bronze oxide finish helps prevent cold welding and improve chip flow. The Work-Rite taps are a lower-cost alternative.
www.triumphtwistdrill.com

Cordless tool replacement batteries
TopCell batteries are premium quality cordless power tool replacement batteries that come in a variety of common voltages (9.6, 12, 14.4, 18, 24 volts and more) and work in virtually any power tool.
www.10ctech.com

MRO/construction catalog
Triumph Twist Drill offers its new MRO/Construction Product Catalog that features its quality offering of drills, taps, burs, annular cutters, alignment reamers and sets, in an easy-to-read format. Includes all Triumph brands, such as the ThunderBit Drills and ThunderTaps, and are featured in full color. Also includes the new Work-Rite industrial taps that include hand taps, spiral-point taps, pipe taps and tap sets. Also includes a combination drill and tap, drilling/tapping fluid and tap wrenches.
www.triumphtwistdrill.com

Roofing nail
Senco’s ring shank Weatherex II plated coil roofing nails are designed for Miami-Dade County and other regions requiring increased corrosion and shingle uplift resistance. The ring shank results in incredible holding power while the Weatherex II plating resists corrosion better than standard roofing nail galvanization. Senco’s HM roofing nails exceed the ASTM G85 standard, and are listed for use in Miami-Dade or other regions that observe the Miami-Dade building codes.
www.senco.com

Full round head framing nailer
Senco’s new SN902XP full round head framing nailer is a well-balanced lightweight XP tool that packs plenty of power and won’t leave you fatigued at the end of the day. Drives ring, screw, and smooth-shank nails. Senco XP tools are well-built and backed by a five-year limited warranty, Senco sources report.
www.senco.com

Clipped head framing nailer
Senco’s new SN901XP clipped head nailer is a well-balanced, lightweight XP tool that packs plenty of power and won’t leave you fatigued at the end of the day. Drives ring, screw, and smooth-shank nails. Tools are engineered for demanding pros and demanding environments. Senco XP tools are backed by a five-year limited warranty.
www.senco.com

Sheathing nail
In order to provide greater holding power in high wind areas, Senco has developed the new StormCode5 sheathing nail that significantly increases the holding power and draw-down force, making it perfect for areas where high winds are a concern. StormCode5 nails are currently available in full round head plastic collated strips.
www.senco.com

Cordless gas framing nailer
The new Senco clipped head GT90CH cordless gas framing nailer combines the convenience of a cordless tool with the power and utility of a pneumatic framing nailer. These well-balanced nailers have the power to complete framing and sheathing jobs. Come with a Ni-MH battery, battery charger, service tools, durable plastic case, and a two-year limited warranty.
www.senco.com