Tool bags
Capital Safety has developed a line of tool bags designed to connect effortlessly and securely to full body harnesses. DBI-SALA’s line of puncture- and tear-resistant tool bags includes an 11-pocket and 15-pocket model. The 11-pocket bag accommodates a variety of tools and fasteners including a combination square and pry bar. The 15-pocket model includes an iron hammer loop and removable top pouch for a tape measure.
www.capitalsafety.com

Hydration system
Capital Safety’s DBI-SALA hydration system for full-body harnesses is a compact system that connects to any DBI-SALA harness and holds 50 oz. of liquid for hydration. Clips to the back of the harness and keeps liquid fresh and at the right temperature. The drink tube clip prevents entanglement and snaps free when snagged.
www.capitalsafety.com

Tie-back lanyard
The Shockwave2 tie-back lanyard from Capital Safety combines an elastic leg feature with the benefits of a
tie-back lanyard. It is abrasion-resistant and equipped with two indicator stitches; one that identifies the furthest point the user should tie-back to, and another to notify the user or inspector that the lanyard has been impacted. The lanyard can be wrapped around a structural element with a diameter of up to 3'.
www.capitalsafety.com

Tie-back lanyard with anchorage connector
The DBI-SALA WrapBax2 from Capital Safety is a tie-back lanyard that eliminates the need for a separate anchorage connector. Available in single and twin leg versions, its webbing provides abrasion resistance, so it’s ideal for use on rough surfaces. Comes in two shock absorber styles: the EZ-Stop II for tying off overhead or the Force2 for tying off at your feet.
www.capitalsafety.com

Parapet anchor
The DBI-SALA Parapet Wall Anchor from Capital Safety features a unique non-penetrating design and a simple, two-step installation process. The anchor is lightweight, allowing it to be transferred between locations with ease. It fits walls between 1" and 14.5" wide and can be used as a tie-off point for shock-absorbing lanyards, self-retracting lifelines or ropes and rope grab systems.
www.capitalsafety.com

Counterweight anchor
The DBI-SALA Freestanding Counterweight Anchor is a non-penetrating fall protection anchor for flat roofs or structures. Eliminates costly and time-consuming anchorage installation. Features ergonomic counterweights and a built-in shock-absorbing post. For one user.
www.capitalsafety.com
 

Freestanding counterweight anchor
DBI-SALA’s Perimeter Limiter freestanding counterweight anchor provides fall protection for decking during concrete construction. Provides a maneuverable, non-penetrating, overhead anchorage point for a personal fall-arrest system for up to two users. No tools are required to anchor or move it and pick points allow it to be hoisted to the work level.
www.capitalsafety.com

Tie-back self-retracting lifeline
The DBI-SALA Talon tie-back self-retracting lifeline eliminates the need for a separate anchorage connector. Available in single-leg and twin-leg versions, it is equipped with impact indicators on each leg, while three layers of webbing in the tie-back area provide abrasion resistance for added safety. Can be anchored around most structures.
www.capitalsafety.com

Retractable horizontal lifeline
Capital Safety’s DBI-SALA EZ-Line retractable horizontal lifeline is a unique, system that eases the stress of installing, recoiling and removing horizontal lifeline systems with a built-in retractor device. The 60' system deploys easily and retracts from its compact hand-held housing. Compatible with most horizontal lifeline stanchions on the market and any DBI-SALA and Protecta anchorage connector or stanchion.
www.capitalsafety.com

Self-retracting lifeline
The DBI-SALA Sealed-Blok self-retracting lifeline from Capital Safety keeps critical components free of dirt, grease, water and chemicals. Its cast aluminum housing and steel end plates resist damage and provide corrosion resistance. Anti-ratcheting brake stops falls within inches and it maintains a 2' reserve for shock absorption when entire lifeline is extended.
www.capitalsafety.com

Rescue kit
The DBI-SALA Rollgliss rescue kit is a safe, reliable and practical packaged solution for fallen worker rescue. Workers perform simple, timely and efficient emergency rescue without descending to the victim. Lightweight and portable, it contains all components needed for rescue.
www.capitalsafety.com

LED flashlights
Klein Tools recently unveiled its new line of 10 flashlights with advanced-technology LEDs to provide superior light. For illumination in a variety of work environments, Klein flashlights are made of nearly indestructible polymers for years of service. Flashlight accessories include nylon holders, luminescent shrouds and a helmet mounting kit.
www.kleintools.com

Hard hats and caps
Klein Tools recently launched its new line of hard hats and caps which includes the V-Gard cap and hat, Advance cap, Skullgard cap and hat and Western Outlaw Hat. These hard hats and caps provide Klein Tools logo branding and color choices as well as four-point Fas-Trac ratcheting suspension.
www.kleintools.com

Shoulder protector
Nomic Designs offers the Ergo Shoulder protector for workers who regularly carry objects on their shoulders. Unit cushions the load and protects the worker from hot, cold or wet material as well as saves clothing from grease, sap, dirt and wear and tear. One size fits most and can be donned quickly and easily. Available in yellow, red or orange and can be customized with your company logo.
Item 152 | Complete press release | www.nomicdesigns.com

Vinyl-coated products for dirty environments
Miller Fall Protection announces a new line of Miller vinyl-coated fall protection products designed for dirty job environments. Vinyl-coated Revolution harnesses and shock-absorbing lanyards feature special vinyl coating on the webbing to protect them from a variety of liquids and other job-related contaminants that could compromise overall performance.
www.millerfallprotection.com

Two-piece mast system
The new Miller DuraHoist confined space two-piece mast system provides various height options for height-restricted confined space and fall-arrest applications. The system provides flexibility to change overall system height from 41" to 146". Ideal for confined space and fall-arrest applications in construction and general industry.
www.millerfallprotection.com

Personal fall limiter
Miller Fall Protection now offers the TurboLite personal fall limiter. Users will never need a shock-absorbing lanyard again with this only 1.9 lb. and compact alternative, report Miller sources. Provides 6' of working capacity lifeline and attaches directly to the harness back D-ring for greater mobility. No need to switch out equipment to maintain a safe fall distance.
www.millerfallprotection.com

Full-body harnesses
Miller Revolution harnesses feature the PivotLink connection for independent adjustment of upper and lower torso and soft, textured inside webbing with chemical-resistant polyester outer material DualTech webbing for a more comfortable fit. Self-contained label pack on the front of the harness offers easy access and minimizes damage and loss.
www.millerfallprotection.com

Temporary horizontal lifeline
Miller Fall Protection introduces the SkyGrip temporary horizontal lifeline system designed for steel and concrete fall protection applications. Workers can maintain continuous fall protection along entire lifeline. Installs easily with above-the-beam adjustments. Single span systems of up to 60'; multiple span systems up to 300'.
www.millerfallprotection.com

Contractor harnesses
Miller Fall Protection introduces a new line of Miller contractor harnesses specially designed for use in construction. Provides all-day comfort while working at heights and features a unique combination back D-ring pad/shoulder pads that minimize discomfort/stress around the neck and shoulder when using a tool belt.
www.millerfallprotection.com

Web self-retracting lifelines
New Miller Falcon web self-retracting lifeline is the lightest, most compact web self-retracting lifeline on the market, weighing less than 3 lbs. (base unit without carabiner). Has high-strength Technora webbing for extreme durability; swivel at unit top to prevent lifeline twisting during use; and rated for up to 400 lb. worker. Available in 16' and 20' models.
www.millerfallprotection.com

Horizontal lifeline kits
Miller Fall Protection introduces the TechLine horizontal lifeline kits that configure to accommodate one or two workers. Kits include low-stretch, fluorescent green rope lifeline, cross-arm anchorage straps for easy installation, connecting O-rings and rope lifeline adjuster. Designed so anchorage points only need to be rated for 5,000 lbs.
www.millerfallprotection.com

Kneepads
Custom LeatherCraft understands how tough your work is and how it can be very hard on your knees. The patent-pending CLC #347 Armadillo kneepads are designed for heavy use with flexible, air cushion protective caps and closed-cell foam inner padding for full knee protection. Nylon web and elastic straps allow for easy adjustment and a secure fit for all-day wear.
www.clccustomleathercraft.com

Flooring kneepads
Custom LeatherCraft’s #342 flooring kneepads are constructed of heavy-duty ballistic polyester fabric and binding. Inner padding is made of high-density, closed-cell foam so it provides that extra comfort your knees deserve.
www.clccustomleathercraft.com

Medium-duty kneepads
Custom LeatherCraft offers the patent-pending #239 Duralite kneepads that feature injection-molded, Contour-Fit Kneecups for all-day comfort and stability. The Memory-Flex synthetic rubber straps increase elasticity and comfort. Durable and lightweight, they are perfect for medium-duty activities.
www.clccustomleathercraft.com

Complete glove line
Custom LeatherCraft’s complete selection of gloves are designed, developed, and tested for superior performance and exceptional value. Here, the #2030 Latex Dip gloves are made of a cotton/polyester knit shell with 100 percent latex-dipped palms. Elasticized cuffs make for easy on, easy off.
www.clccustomleathercraft.com

High-dexterity glove line
Custom LeatherCraft introduces the Flex Grip high-dexterity glove line that features its #145 Tradesman glove (pictured) for serious abrasion resistance and flexibility. Comfortable, tough Clarino Amalite microfiber synthetic leather palm and fingers with textured palm pads offer a better grip and added durability.
www.clccustomleathercraft.com

Work glove
Custom LeatherCraft introduces the CLC Hybrid line featuring the #275 dexterity work glove. It marries the benefits of top grain leather with the supple-stretch, breathable characteristics of spandex. Reinforced palms offer additional comfort and protection. They feel so good you’ll hate to take them off, report CLC sources.
www.clccustomleathercraft.com